12. EXEMPTIONS

12.1. Non-UK Registered & Resident Vehicles

12.1.1. In some countries, the law forbids welding to the chassis of road-going vehicles. (Germany, France, Denmark, for example). Competitors from such countries may be required to prove that a welded assembly is not permitted. For vehicles registered and normally resident in such countries, a bolted-on roll-cage mount is allowed. The rear brace mount is like this:-

12.1.2. (Drawing)

12.1.3. (Drawing)

12.1.4. The main hoop mount is the same as the "old" bolted design and attachment is by the usual 3/8" / 10mm HT mounting bolts.

12.1.5. (Drawing)

12.1.6. All plates are to be 6mm / 1/4" and nuts and bolts to be 3/8" / 10mm high tensile as elsewhere.

Please direct enquiries to the ALRC Scrutineering & Off-Road Committee.

Go back to 11, or back to Rollbar Index

Last Updated:
19/02/2007